Simple answers for drivers, fleet managers, maintenance managers, environmental officers and retailers. If your question is not here, write to us on WhatsApp at 8377-9999.

About Meca-Run and OKO

What is Meca-Run?

It is a French brand of treatments for fuels, lubricants and engines, developed by chemical and mechanical engineers in France. Its products help burn fuel more efficiently, reduce emissions and extend the life of engines, boilers and generators.

Who represents the brands in Costa Rica?

Apuqueña Car, S.A. (Meca-Run Latinoamérica) has been the exclusive representative of Meca-Run for Central and Latin America since November 2011. It also imports and markets OKO Tyre Sealant, a preventive tire sealant from the United Kingdom.

What products do you offer?
  • C-99 Gasolina and C-99 Diésel: continuous-use treatment, with every fill-up.
  • ECO 10000: deep cleaning of the fuel system.
  • P-18 Antifricción: protects engines, gearboxes and transmissions against wear.
  • C-Fuel 5000: for boilers, generators and equipment that use bunker fuel or diesel.
  • Marine line: C-99, ECO 10000 and P-18 for marine engines.
  • OKO Tyre Sealant: seals the flat tire while the vehicle keeps rolling.

How they work

How does Meca-Run work, in simple terms?

It works like an atomizer inside the combustion chamber: it turns the fuel into very fine droplets that mix better with oxygen and burn more completely. The engine or boiler gets more energy from every liter and stays cleaner, since less fuel ends up as smoke, soot and deposits.

Is it a solvent or an aggressive chemical?

No. C-99 and C-Fuel are concentrated organic surfactants made from essential oils. They contain no benzene, toluene or petroleum-based solvents.

Does it change the composition of the fuel?

No. Its effect is physical: it improves fuel atomization without altering its chemical structure.

What does it do with water and sludge in the tank?

It disperses condensation water so it burns along with the fuel instead of building up at the bottom, and it reduces the formation of sludge that clogs filters and injectors. It is best combined with regular tank draining.

Performance and measurement

How much better does the fuel perform?

It depends on the condition of the equipment, the type of route or operation and the maintenance. That is why we do not promise a percentage: at each company we measure a baseline and compare it with the treatment period under comparable conditions. One customer's results do not automatically carry over to another operation.

When are the results noticeable?

Some effects show up in the first tanks, such as smoother running and, in diesel engines, less smoke. Performance builds with continuous use as injectors, valves and chambers get cleaner. For companies, we recommend measuring for one to three months against the baseline.

How is it measured in a fleet?

With kilometers per liter, comparing the same units, routes and loads before and during treatment. In diesel engines, opacity is also compared. For the same distance, the liters avoided are calculated as distance ÷ km/L before minus distance ÷ km/L after.

And in a boiler or generator?

In boilers, with kilograms or pounds of steam produced per liter of fuel, together with before-and-after flue gas analysis and burner adjustment. In generators, with kWh produced per liter. Application does not require modifying the equipment.

Emissions, vehicle inspection and ISO

Which emissions does it reduce?

More complete combustion reduces carbon monoxide, unburned hydrocarbons, particles and soot. In diesel engines this shows up as less opacity and black smoke. For boilers, Executive Decree 43184-S-MINAE sets the emission limits, and measurements make it possible to document the before and after.

Will it help me pass the vehicle inspection?

It can help prepare the vehicle, because cleaner combustion reduces smoke and gases. Approval depends on the overall condition of the vehicle and on the official inspection. For vehicles with high emissions, we recommend a treatment with ECO 10000 before the appointment.

Is it useful for ISO 14001 and ISO 50001?

Before-and-after measurements of consumption and emissions can be documented as indicators in an Environmental Management System (ISO 14001) or an Energy Management System (ISO 50001), and in your organization's greenhouse gas inventory.

Safety for engines and equipment

Can it damage my engine, sensors or catalytic converter?

No. The products do not damage oxygen sensors, catalytic converters, EGR valves, particulate filters or paper filters; they help keep them clean.

Does it affect my vehicle warranty?

The products are added without modifying the equipment. If your vehicle is under warranty and you have questions, check the manufacturer's manual or your dealer and the product's technical data sheet.

Which fuels is it compatible with?

C-99 Gasolina with gasoline; C-99 Diésel with diesel and biodiesel; C-Fuel 5000 with bunker fuel and industrial diesel. The Marine line is formulated for gasoline and diesel marine engines.

Dosage and pack sizes

How much product should I use?
ProductDosage
C-99 Gasolina and Diésel1 L per 5,000 L of fuel (10 ml per 50 L), according to the technical data sheet for each application.
C-Fuel 50001 L per 5,000 L of fuel.
ECO 100001:500 for fleets, marine, heavy machinery and industrial equipment. For cars, follow the label.
P-18 Antifricción4 % of the oil volume.

Always follow the product label and technical data sheet.

What pack sizes are available?

In the online store: Meca-Run in 20, 100 and 250 ml; P-18 in 150, 250 and 500 ml. Other pack sizes and contracts: Sales Department, 8930-9507.

OKO Tyre Sealant

What is OKO and how does it work?

It is a preventive tire sealant made in the United Kingdom. It is applied inside the tire and stays liquid. When a nail, stone or thorn pierces the tire, air pressure pushes the sealant into the hole and seals it while the vehicle keeps rolling. A single application seals several holes.

Does it damage the tire or the rim?

No. It is non-flammable, anti-corrosive, antibacterial and water-soluble. It does not react with rubber, allows retreading and patching, and does not void the tire warranty. It also lowers tire temperature.

What types of OKO are there?
TypeEquipmentUse
Off RoadTractors, agricultural and construction machinery, trailersOff-road, under 80 km/h
Mining X-Tra Heavy DutyDump trucks, haul trucks, loadersOff-road, under 80 km/h
Truck & BusBuses, cargo trucks, garbage trucksHighway
X-Treme Dirt BikeMotocross, enduro, farm motorcyclesOff-road
Quad / ATVQuads, UTVs, side-by-sidesOff-road, low speed
Will it work for my car?

It depends on the vehicle and how it is used. Write to us with the type of vehicle and the tire size and we will tell you if there is a suitable OKO.

Purchases and contact

Where can I buy?

Drivers and small businesses: in the online store, up to 4 units per product per month. Companies, institutions and contracts: Sales Department, 8930-9507. Questions on WhatsApp: 8377-9999.

How does a project with my company start?

With a free diagnosis: we check the equipment and the fuel, set the baseline and how to measure the before and after, and at the end we review the results together.

Need a recommendation for your equipment?
Write to us on WhatsApp at 8377-9999. Companies and institutions: Sales Department, 8930-9507.